Figure 3-10. No Vmebus Timeout; Multiple Vxi-Mxis In Mainframe - National Instruments VXI-MXI User Manual

Configuration and Installation
For the VXI-MXIs that do not supply the VMEbus timeout, set the VME BTO Chain Position
jumper block to reflect each VXI-MXI's position in relation to the adjacent VXI-MXIs. See
Figure 3-10.
W7
a. Slot 0 VXI-MXI without BTO,
Multiple VXI-MXIs in Mainframe
W7
c. Non-Slot 0 VXI-MXI without BTO,
VXI-MXI Located between
Two VXI-MXIs, Multiple
VXI-MXIs in Mainframe
(Suggested Configuration)

Figure 3-10. No VMEbus Timeout; Multiple VXI-MXIs in Mainframe

VXI-MXI User Manual
VME BTO
Chain Position
VME BTO
Chain Position
3-12
W7 VME BTO
Chain Position
b. Non-Slot 0 VXI-MXI without BTO,
the VXI-MXI Closest to Slot 0,
Multiple VXI-MXIs in Mainframe
VME BTO
W7
Chain Position
d. Non-Slot 0 VXI-MXI without BTO,
the VXI-MXI Furthermost from Slot 0,
Multiple VXI-MXIs in Mainframe
© National Instruments Corporation
Chapter 3