Figure 3-9. Vmebus Timeout; Multiple Vxi-Mxis In Mainframe - National Instruments VXI-MXI User Manual

Chapter 3
If the system contains more than one VXI-MXI, select which card will supply the VMEbus
timeout, and set the jumper block according to the VXI-MXI's position in relation to the adjacent
VXI-MXIs. Figure 3-9 shows four possible settings.
W7
a. Slot 0 VXI-MXI with BTO,
Multiple VXI-MXIs in Mainframe
(Suggested Configuration)
c. Non-Slot 0 VXI-MXI with BTO,
VXI-MXI Located between
Two VXI-MXIs, Multiple
VXI-MXIs in Mainframe

Figure 3-9. VMEbus Timeout; Multiple VXI-MXIs in Mainframe

© National Instruments Corporation
VME BTO
Chain Position
VME BTO
Chain Position
3-11
Configuration and Installation
W7 VME BTO
Chain Position
b. Non-Slot 0 VXI-MXI with BTO,
the VXI-MXI Closest to Slot 0,
Multiple VXI-MXIs in Mainframe
VME BTO
W7
Chain Position
d. Non-Slot 0 VXI-MXI with BTO,
the VXI-MXI Furthest from Slot 0,
Multiple VXI-MXIs in Mainframe
VXI-MXI User Manual