Dismantling And Disposal; Disposal Of Packaging Materials - Meiko FV 28G Operating Instructions Manual

Maintenance procedures
Protective conductor check
Measure insulation resistance
Protection conductor current measurement
9. Detergent dosing
Check dosage, adjust if necessary
10. Rinse aid dosing
Check dosage, adjust if necessary
11. Operation check of the complete machine
Check machine for correct interaction of all functions
12. Test run
Check results of test wash and rinse
Brief instruction for new personnel
Pos : null /Übersc hriften/1.1/Ents orgung des Ver pac kungs materi als @ 0\mod_1414757344181_6.doc x @ 840 @ @ 1
Pos : null /Demontag e/Entsorgung des Verpac kungsmaterials @ 0\mod_1414757241588_6.doc x @ 838 @ @ 1
Pos : null /Übersc hriften/1.1/D emontage und Entsorgung des Altg eräts @ 16\mod_1580463813076_6.doc x @ 202227 @ @ 1
9625762
18

Dismantling and disposal

In addition to valuable raw materials and recyclable materials, the packaging and the old
device may also contain substances that are harmful to health and the environment and
were required for the function and safety of the old device.
Please do not dispose of your old device in residual waste. Instead, contact your dealer
or the collection points set up in your community for information regarding the disposal of
your old device.

18.1 Disposal of packaging materials

All the packaging materials are recyclable. The following materials are used:
– Square timber frame
– Plastic sheeting (PE film)
– Cardboard packaging (edge protection)
– Packaging strap (steel strip)
– Packaging strap (plastic (PP))
Note
The square timber frame consists of untreated raw pine / spruce. In order to guard
against pests, country-specific import regulations may also stipulate the use of
treated wood.
42 / 44
at least
once a
year
at least
once a
year
at least
once a
year