Before Using For The First Time; Parts And Operating Controls - Bosch OptiMUM 9 Series Instruction Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 3
Before using for the irst time 
Before the new appliance can be used, 
it must be fully unpacked, cleaned and 
checked. 
Never operate a damaged appliance!
  ■ Remove the base unit and all 
accessories from the packaging and 
dispose of all packing materials.
  ■ Check that all the parts are present and 
examine them for obvious damage. 
X F i g.
A
  ■ Thoroughly clean and dry all parts 
before using for the first time. 
X "C l eaning and maintenance" see
page 9
P a rts and operating
controls
C o lour coding
The drives have different colours (black, 
yellow and red). This colour coding system 
can also be found on the accessories. Only 
use accessories for the drive with the same 
colour.
X F i g.
A
The appliance has 3 different drives.
For using tools or for using 
accessories with a bevel gear.
For using accessories with a 
yellow connector.
For using accessories with a red 
connector.
For covering unused drives.
Further information: X "A c cessories" see
page 1 2
6 
X F i g.
B
The rotary switch is used to select 
the required speed or to switch the 
appliance off. The appliance will no longer 
switch on if there is an error in appliance 
operation, if the electronic fuses trip or the 
appliance has a defect.
Instantaneous switching 
r
at maximum speed / fast. Hold 
down switch for required duration.
Stop / Switch off
y
Function "Folding in" at minimum 
z
speed / very slow. 
Speed settings
: low speed / slow
: maximum speed / fast
X F i g.
A
Professional flexible
beating whisk
For stirring dough, e.g. sponge 
mixture or mousse 
For folding in beaten egg whites or cream
For whisking egg whites, cream 
and light dough, e.g. sponge 
mixture
For kneading heavy dough 
(e.g. yeast dough) and folding in 
ingredients which should not be 
cut up (e.g. raisins, chocolate chips).

Advertisement

Table of Contents
loading

Table of Contents