Before Using The Appliance For The First Time; Parts And Operating Controls - Bosch OptiMUM MUMPCV4S12 Instruction Manual

en

Before using the appliance for the first time

Before using the appliance
for the first time
Before the new appliance can be used,
it must be fully unpacked, cleaned and
checked.
Caution!
Never operate a damaged appliance!
■ Remove the base unit and all
accessories from the packaging and
dispose of all packing materials.
■ Check that all the parts are present and
examine them for obvious damage.
X Fig. A
■ Thoroughly clean and dry all parts
before using for the first time.
X "Cleaning and maintenance" see
page 33
Parts and operating
controls
Colour coding
The drives have different colours (black,
yellow and red). This colour coding system
can also be found on the accessories. Only
use accessories for the drive with the same
colour.
Drives
X Fig. A
The appliance has 3 different drives.
Main drive, black (4)
For using tools or for using
accessories with a bevel gear.
Front drive, yellow (5)
For using accessories with a yellow
connector.
Rear drive, red (6)
For using accessories with a red
connector.
Protective drive covers (5a and 6a)
For covering unused drives.
Further information: X "Accessories" see
page 38
24
Display
X Fig. A
Settings, information, error messages and
values are indicated on the display. Here,
long texts will run from right to left in order
to display them fully.
Example:
YEAST DOU
HOLD ROTARY S
AST DOUGH
ON M/A FOR 2s
The language in which the text is displayed
can be changed. X "Settings" see
page 26
Function buttons
X Fig. A
The appliance has 3 to 5 function buttons
(depending on the model), using which
special additional functions and automatic
programmes can be selected and adjusted.
Buttons
SensorControl Plus /
D*
Programme selection / Back
A*
Timer / Selection / Back
C*
Scales / Tare / Back
-
Reduce selection/values
+
Increase selection/values
* Depending on the model
Function selection buttons D / A / C
Briefly pressing them will activate the
function selected. Press and hold to leave
the selected function. "OptiMUM" will
appear on the display again.
GH
WITCH ON