Closing The Machine Box - Bdcom S2928E Hardware Installation Manual

BDCOM S2928E Hardware Installation Manual
Caution: The device shown in the above figure does not represent the material
BDCOM S2928E.
(5) When the cover is opened, put it aside. The mainboard of the system appears.
Note:
After taking off the cover, put it horizontally and avoid it to be crushed or collided.
Otherwise, the machine box is hard to install.

4.2 Closing the Machine Box

The section mainly describes how to put the cover and close the machine box. Do as
follows:
(1) Put them well according to their locations and joint them together along their
sides. See the following figure.
- 15 -