Indicator Description; Note: Customer Shall Not Be Notified Of This Manual's Content Amendments - Bdcom S2928E Hardware Installation Manual

5.2 Indicator Description

The following table shows the indicators of the BDCOM S2928E switch and their
description:
No. Abbrev.
1 PWR
2 SYS
LINK/A
4
CT
Copyright Claims
Without the written approval of the company , any person or group cannot transcribe,
copy or change partial or all contents of this manual, and must not broadcast it in any
manner.
Trademark claims
Trademarks, product names, service names and company names, which are written in
this manual but do not belong to the company, belong to their owners respectively.
Disclaimer of warranty
provides no evident or hinted guarantee towards the contents of this manual. In no event,
except for the company's breach of law, shall the company be liable for incidental,
consequential, indirect or special damages of any kind or for loss of profits or revenue or
loss of business arising out of or relating to this manual.

Note: Customer shall not be notified of this manual's content amendments.

Name
Power indicator When the switch is powered on, the indicator is on.
When the indicator is always on, the system is being
started up.
System indicator
When the indicator flickers, the system works well.
When the link on the port is normal, the indicator is
indicators of each
always on.
port
When the link on the port is failed, the indicator is off.
BDCOM S2928E Hardware Installation Manual
Description
- 18 -