System Bios; Starting Setup; Parameter Descriptions; Main - NEC Express5800 Series Maintenance Manual

Chapter 2 Convenient Features
1.

System BIOS

You can check and change the parameters using the BIOS Setup utility (SETUP).
1.1

Starting SETUP

Turn on the server and proceed with POST.
Wait until the following message appears at the bottom left of the screen.
Press <F2> SETUP, ... (* a different message may appear depending on the environment)
If you press <F2>, SETUP will start after POST, and the Main menu appears. (You can also start SETUP by
pressing <F2> key while expanding option ROM.)
1.2

Parameter Descriptions

The SETUP utility has the following six major menus.

Main menu

Advanced menu

Security menu

Server menu

Boot menu

Save & Exit menu
These menu has submenus for relevant items. Selecting submenus allows you to configure further detailed
parameters.
1.2.1

Main

If you start up the SETUP utility, the Main menu is displayed first.
Express5800/E120d-1 Maintenance Guide
1. System BIOS
49