NEC Express5800 Series Maintenance Manual page 60

Chapter 2 Convenient Features
(4) Advanced Chipset Configuration submenu
From the Advanced menu, select Advanced Chipset Configuration and then press the <Enter> key to
display the menu screen as shown below.
For details about the options, see the table below.
Option
Current QPI Link Freq
QPI Frequency Limit
HPET
Periodic SMI
VT-d
I/OAT
Wake On LAN/PME
Wake On Ring
Wake On RTC Alarm
60
Parameter
Information Only
[Auto]
6.4 GT/s
7.2 GT/s
8.0 GT/s
Disabled
[Enabled]
Disabled
[Enabled]
Disabled
[Enabled]
Disabled
[Enabled]
Disabled
[Enabled]
[Disabled]
Enabled
[Disabled]
Enabled
Note
If the AC power is turned off, the Wake on Ring feature is not available on the next
system boot after AC power-on. Press the Power switch to boot the system.
Express5800/E120d-1 Maintenance Guide
Descriptions
The current QPI link speed is displayed (display only). This
option is displayed only in multiple processor configuration.
Specify the upper limit of QPI link speed.
Enable or disable the High-Precision Event Timer. This
feature may not be supported depending on OS.
Enable or disable periodic SM interrupt.
Enable or disable Intel(R) Virtualization Technology for
Directed I/O feature (Virtualization of I/O feature). This option
is displayed only when the installed processor supports this
feature.
Enable or disable Intel I/O Acceleration Technology feature.
Enable or disable the feature that remotely powers on through
a network.
Enable or disable the feature that remotely powers on via
serial ports (modems).
Enable or disable the feature that remotely powers on using
the real time clock.
1. System BIOS
[ ]: Factory setting