System Diagnostics; Test Items; Startup And Exit Of System Diagnostics - NEC Express5800 Series Maintenance Manual

Chapter 1 Maintenance
8.

System Diagnostics

System Diagnostics runs several tests on the server.
8.1

Test Items

The following items are tested in System Diagnostics

Memory

CPU cache memory

Hard disk drive
8.2

Startup and Exit of System Diagnostics

Start up System Diagnostics in the following procedure. (If the server is running, shutdown the system.)
1. Start up EXPRESSBUILDER and select Tool menu.
For information on starting up EXPRESSBUILDER, refer to Chapter 2 (6. Details of
EXPRESSBUILDER).
2. Select Test and diagnostics.
Select End-User Mode to start System Diagnostics. This process takes about three minutes.
When the diagnostics is completed, the screen display changes as shown below.
42
Important
Be sure to disconnect the LAN cable before executing System Diagnostics.
Executing System Diagnostics with the LAN cable connected may affect the
network.
Tips
On checking hard disk drives, no data is written to the disk.
Note In case Language selection menu appears, select English.
If " Hit key to continue. [y|Y] " is displayed in Redirection mode, press <y> key (or
<Y> key).
Express5800/E120d-1 Maintenance Guide
8. System Diagnostics