NEC Express5800 Series Maintenance Manual page 58

Chapter 2 Convenient Features
(a) PCI Device Controller and Option ROM Settings submenu
For details about the options, see the table below.
Option
VGA Controller
VGA Priority
LAN Controller
LAN1 Option ROM Scan
LAN2 Option ROM Scan
PCI1/2 Slot Option ROM
58
Parameter
Disabled
[Enabled]
[Offboard]
Onboard
Disabled
[Enabled]
Disabled
[Enabled]
[Disabled]
Enabled
Disabled
[Enabled]
Note
For a RAID Controller, LAN card (network boot), or Fibre Channel controller, if no
Hard Disk Drive on which an OS is installed is connected, set the option ROM for
that slot to Disabled.
Express5800/E120d-1 Maintenance Guide
Descriptions
Enable or disable the on-board VGA controller.
Specify priority to expand ROM of VGA controller.
Enable or disable the on-board LAN controller.
Enable or disable the option ROM SCAN for on-board LAN 1.
Enable or disable the option ROM SCAN for on-board LAN 2.
Enable or disable the option ROM on each PCI slot.
1. System BIOS
[ ]: Factory setting