Windows System Recovery; Recovery Of Windows Server 2008 R2 And Windows Server 2008 - NEC Express5800 Series Maintenance Manual

Chapter 1 Maintenance
6.

Windows System Recovery

Recover the Windows system by following the instructions below if the files necessary to operate Windows are
corrupt.
6.1

Recovery of Windows Server 2008 R2 and Windows Server 2008

If Windows does not start for some reason, you can recover Windows using the system recovery option. Be
sure to perform this operation under the supervision of a user or administrator who has a thorough knowledge
of this option. For details, refer to Windows Help.
When the OEM drivers are required, copy the files under the following designated folder in
EXPRESSBUILDER to removable media.
 Windows Server 2008 R2:
 Windows Server 2008 64-bit Edition:
 Windows Server 2008 32-bit Edition:
36
 After recovering the system, be sure to install each driver and Starter Pack,
Note
referring to (4.5 Setting Up Device Drivers) and (3.4 Installing Starter Pack, 4.4
Installing Starter Pack) in "Installation Guide (Windows)".
 If Hard Disk Drive cannot be recognized, you cannot recover the Windows
system.
 Depending on the server configuration, you may be required to create copies of
OEM drivers on removable media.
\026\win\winnt\oemfd\ws2008r2
\026\win\winnt\oemfd\ws2008x64
\026\win\winnt\oemfd\ws2008
Express5800/E120d-1 Maintenance Guide
6. Windows System Recovery