NEC Express5800 Series Maintenance Manual page 61

Chapter 2 Convenient Features
(5) Storage Configuration submenu
From the Advanced menu, select Storage Configuration and then press the <Enter> key to display the menu
screen shown below. For the menu that has
to show its submenus.
For details about the options, see the table below.
Option
SATA Information
SATA Mode
Hard Disk Drive Pre-Delay
on the left, move the cursor to it and then press the <Enter> key
Parameter

Disabled
[IDE Mode]
AHCI Mode
[Disabled]
3 Seconds
6 Seconds
9 Seconds
12 Seconds
15 Seconds
21 Seconds
30 Seconds
Note
NEC has not verified AHCI driver support.
Express5800/E120d-1 Maintenance Guide
Descriptions
Set SATA Mode.
Specify delay time before HDD is accessed during POST.
1. System BIOS
[ ]: Factory setting
61