NEC Express5800 Series Maintenance Manual page 69

Chapter 2 Convenient Features
If TXT Support is enabled, the following screen is displayed.
For details about the options, see the table below.
Option
TPM Configuration
TPM Support
TPM State
Pending TPM operation
Current TPM Status Information
TPM Enabled Status
TPM Active Status
TPM Owner Status
Intel(R) TXT Configuration
TXT Support
VT-x
VT-d
Parameter

[Disabled] Enable or disable Trusted Platform Module feature.
Enabled
When set to Enabled, Current TPM Status
Information is displayed.
[Disabled] Enable or disable TPM features. This option can be
Enabled selected when TPM Support is set to Enabled.
[None] Configure TPM operation.
Enable Take Ownership This option can be selected when TPM State is set to
Disable Take Ownership Enabled.
TPM Clear

Enabled Current status of TPM feature is displayed. (Display
Disabled only)
Activated
Deactivated
Owmed
UnOwned

[Disabled] Enable or disable Trusted Execution Technology
Enabled feature. This option can be selected when VT-x, VT-d,
and TPM State are set to Enabled.
Disabled Enable or disable Intel(R) Virtualization Technology
[Enabled] (feature to virtualize processor).
Disabled Enable or disable Intel(R) Virtualization Technology for
[Enabled] Directed I/O feature (Virtualization of I/O feature). This
option is displayed only when the installed processor
supports this feature.
Express5800/E120d-1 Maintenance Guide
1. System BIOS
Descriptions

－
－
[ ]: Factory setting
69