NEC Express5800 Series Maintenance Manual page 26

Chapter 1 Maintenance
[?] When Starter Pack is executed on Windows Server 2008 R2, the below message is sometimes displayed
for a moment upon shutdown
1 program still needs to close:
(Waiting for) Task Host Window

No problems for system operation.
For details, refer to the Microsoft website below:
http://support.microsoft.com/kb/975777/en-us
[?] The system was installed as Workgroup although it is set to join the domain
 Is the LAN cable properly connected?

If the LAN cable is not connected, the system is installed in workgroup setting, not in domain join setting.
After the OS is started, join the domain.
[?] The following features are installed when Windows Server 2008 R2/Windows Server 2008 IIS is installed
using EXPRESSBUILDER
 Windows Process Activation Service
 Process Model
 Configuration APIs
 Remote Server Administration Tool
 Role Administration Tools
 Web Server (IIS) Tools

The features listed above are activated because they are required for the installation of IIS basic
features.
[?] The Telnet Service is not installed

Adjust the computer name to 14 characters or less, and then install the Telnet Service according to the
following procedure:
How to install the Telnet Service
(1) Click Run on Start menu.
(2) Enter tlntsvr/service in the Open box, and then click [OK].
(3) Click Start menu, point to Control Panel, click Administrative Tools, and then click Services to
confirm whether the Telnet Service is registered.
* When the installation of Telnet Service is finished, there is no problem if the computer name is set to 15
characters or more.
[?] Fails to execute "Create a parameter file for Windows OS"

"Create a parameter file for Windows OS" must be run using Microsoft
does not start, associate the file type with Microsoft
(1) Select Run in Windows Start menu.
(2) Enter %windir%\system32\mshta.exe/register.
26
®
Express5800/E120d-1 Maintenance Guide
®
HTML Application host. If it
HTML Application host via the following process.
5. Troubleshooting