Security - NEC Express5800 Series Maintenance Manual

Chapter 2 Convenient Features
1.2.3

Security

If you move the cursor to Security, the Security menu appears. For the menu that has
the cursor to it and then press the <Enter> key to show its submenus. Then configure the settings.
Select Administrator Password or User Password, and then press the <Enter> key to display the screen
where you can register/change the password.
For details about the options, see the table below.
Option
Password Configuration
Administrator Password
User Password
66
 User Password cannot be set without setting Administrator Password
Tips
 Do not set any password before installing OS.
 If you have forgotten any password, contact the store where you purchased the
product or your maintenance service company. If you want to clear password,
refer to Chapter 1 (7. Resetting and Clearing the Server)
Parameter

Up to 20 alphanumeric
characters
Up to 20 alphanumeric
characters
Express5800/E120d-1 Maintenance Guide
Descriptions

When the <Enter> key is pressed, the password entry screen
to set administrative right is displayed.
This password can be used to access all SETUP menus.
Password can be set only when SETUP is started by
administrative right. If no password is set, SETUP starts with
administrative right.
When the <Enter> key is pressed, the password entry screen
to set user right is displayed. With this password, access to
SESTUP menus is limited. The user password can be set
when SETUP is started by administrative right or user right.
1. System BIOS
on the left, move