NEC Express5800 Series Maintenance Manual page 113

Chapter 2 Convenient Features
(2) Top Menu
Operate Top Menu using the mouse or keyboard.
The following menus are included.
a) Set up this computer
RAID configuration and Windows installation can be performed. For details about how to install an OS, refer
to "Installation Guide (Windows)".
Configure RAID System only
If Configure RAID System only is selected, only creation and modification of the RAID System is
performed. Install an OS separately after setting up the RAID configuration.

Click [Default] to reset the RAID configuration to the default values.

Click [Settings] to launch the setup wizard and set up the RAID configuration by following the instructions
on the screen.

Click [Skip] to cancel the RAID configuration setup.
b) Invoke various utilities
Start a utility provided by EXPRESSBUILDER.
For details about the provided utilities, refer to Chapter 2 (6.3 Utilities Provided by EXPRESSBUILDER).
c) Configure EXPRESSBUILDER settings
Specify EXPERSSBUILDER settings. For details about the settings, refer to Chapter 2 (6.4 Configure
EXPRESSBUILDER Settings).
Tips
EXPRESSBUILDER is a configuration tool and it uses Windows PE. Note that
EXPRESSBUILDER automatically restarts if it is operated continuously 72 hours.
Express5800/E120d-1 Maintenance Guide
6. Details of EXPRESSBUILDER
113