Menus Of Expressbuilder - NEC Express5800 Series Maintenance Manual

Chapter 2 Convenient Features
6.2

Menus of EXPRESSBUILDER

EXPRESSBUILDER is operated by using onscreen menus.
(1) Boot Selection Menu
When EXPRESSBUILDER starts from DVD or Internal Flash Memory, below menu appears.
Os installation *** default ***
Tool menu (Normal mode)
Tool menu (R edirection mode)
Use the upper and lower arrow keys to move the cursor, and then press <Enter> key to select it.
Os installation (default) is selected if no key is pressed.
If Os installation is selected, Top menu shown in (2) Top Menu appears after confirmation of Windows PE
software license.
If Tool menu (Normal mode) is selected, Tool Menu shown in (2) Tool Menu appears. The screen appears on
the display. Select this mode normally.
If Tool menu (Redirection mode) is selected, you can operate EXPRESSBUILDER remotely by using BIOS
Console Redirection. In this mode, the menu items and the tools that can be activated are the same as those in
normal mode.
112
Boot selection
Tips
Be sure to select normal mode when using the remote KVM feature.
Express5800/E120d-1 Maintenance Guide
6. Details of EXPRESSBUILDER