NEC Express5800 Series Maintenance Manual page 50

Chapter 2 Convenient Features
For details about the options, see the table below.
BIOS Information
BIOS Version
Build Date
Access Level
Memory Information
Total Memory
System Language
System Date
System Time
50
Option
Information Only
MM/DD/YYYY
[Administrator]
User
Information Only
[English]
Français
Español
Deutsch
Italiano
WWW MM/DD/YYYY
HH:MM:SS
Be sure to confirm that the date and time in the BIOS parameters are correctly
Tips
configured.
Check the system clock monthly. Additionally, if you implement the server in a
system that requires highly accurate time, use of a time server (an NTP server) is
recommended.
If the system time becomes considerably slow or fast over time even though you
regularly adjust it, contact the dealer where you purchased the server or the
maintenance service company for maintenance.
Express5800/E120d-1 Maintenance Guide
Parameter

The BIOS version is diaplyed (display only).
The BIOS build date is displayed (display
only).
The current access level (Administrator or
User) is displayed (display only).
If no password is set, Administrator is
displayed.

The total capacity of installed memory is
displayed (display only).
Select a disaplay language for SETUP. If you
run SETUP with BIOS Redirection Port
enabled (other than Disabled), English is
automatically selected. At that time, you
cannot change setting of System Language.
If BIOS Redirection Port is set to Disabled,
the language set in this option is used at the
next startup of SETUP, and you can change
the language setting.
Set the system date.
Set the system time
1. System BIOS
Descriptions


[ ]: Factory settings