NEC Express5800 Series Maintenance Manual page 101

Chapter 2 Convenient Features
5. Press the <F10> key to specify Select Configurable Array(s), and then press the space key.
SPAN-1 is set.
SPAN-1
6. Press the <F10> key to create a Virtual Drive.
The Virtual Drive(s) Configured screen is displayed. The following screen shows an example of RAID1
consisting of two Hard Disk Drives. On this screen, xxx.xxxGB indicates the capacity.
VD
0
RAID = 1
Units = MB
Size
DWC
RA
Accept
SPAN = NO
Select Configurable Array(s)
A-0
Virtual Drive(s) Configured
RAID Size
1 xxx.xxxGB
Virtual Drive 0
= xxxxxxMB
= Off
= On
Express5800/E120d-1 Maintenance Guide
#Stripes StripeSz
2 64 KB
5. RAID System Configuration
Status
ONLINE
101