The Function Menu - Sony VPL-PHZ10 Operating Instructions Manual

The Function Menu

The Function menu is used for setting various functions of the projector.
Setting items
Volume
Speaker
Speaker Setting
Smart APA
CC Display
Start Up Image
*3*4
Color Calibration
All Reset
Notes
*1: When the speaker setting is set to "Always On" and the light is turned off, INPUT A
is enabled.
If "Always On" is selected, "ECO Mode" will be set to "User," "Standby Mode" will be
set to "Standard" in conjunction.
*2: APA functions when a computer signal is input via the RGB input terminal (INPUT A).
*3: The pattern for the color calibration is displayed while performing this mode.
If you press the / button on the projector or remote control, the pattern also turns
off. At the same time, this mode also ends.
*4: Color drifts may not be able to be corrected correctly because of environmental
factors, such as temperature and dust, or the extent of changes that occurred
overtime.
Item descriptions
The higher the value, the louder an audio volume and the
lower the value, the lower the audio volume.
On/Off: When set to "On," speaker outputs sound. To not
output sound from the speaker, select "Off."
Sync with Power/Always On: When set to "Always On," the
speaker is available even in Light Cutoff.
On/Off: When set to "On," APA functions automatically when
*2
a signal is input.
CC1/CC2/CC3/CC4/Text1/Text2/Text3/Text4: Select the
closed caption service (captions or text).
Off: Closed caption does not appear.
On/Off: When set to "On," the Start Up Image is displayed on
the screen when the projector is powered on.
Corrects the color drifts of the entire screen that occurred
overtime.
Auto
If you select "On", it corrects the color drifts of the entire
screen automatically when turning off the projector after
certain time of use.
Start
If 20 minutes have passed after the light turning on, it
immediately corrects the color drifts of the entire screen.
*5
Return
Restores the color to that before performing the previous
color calibration.
Reset
Restores the factory setting.
Resets all settings to their factory defaults.
*1
The Function Menu
31