Sony VPL-PHZ10 Operating Instructions Manual page 29

Setting items
*2 *3
APA
*2
Phase
*2 *5
Pitch
*4
Shift
Notes
*1: • Note that if the projector is used for profit or for public viewing, modifying the
original picture by switching to the aspect mode may constitute an infringement
of the rights of authors or producers, which are legally protected.
• Depending on the input signal, setting items for aspect ratio or some other
setting items cannot be set in some cases, or changing the aspect ratio setting
may have no effect.
• A part of the image may be displayed in black, depending on the setting item.
*2: Available when a computer signal is input from the RGB input terminal (INPUT A).
*3: If the projected image includes large amount of black portion around it, the APA
function will not work properly and a part of the image may not be displayed on the
screen and also optimum image cannot be obtained, depending on the type of
input signal. In this case, adjust the "Phase," "Pitch," and "Shift" items manually.
*4: Available when a computer or a video signal is input from the RGB/YP
terminal (INPUT A).
*5: When "APA" (page 29) or "Smart APA" (page 31) is performed, the adjusted value for
"Pitch" will return to its factory default. If you want to continue using the adjusted
value, set "Smart APA" to "Off."
Item descriptions
Automatically adjusts the projected image to an
optimum quality when you press the ENTER key (page 6).
Adjusts the dot phase of the display pixel and the input
signal. Set to the value where looks clearest.
The higher the value, the wider the horizontal image
elements (pitch). The lower the value, the narrower the
horizontal image elements (pitch).
H: The higher the value, the farther right the image is
projected on the screen. The lower the value, the image
farther left.
V: The higher the value, the farther up the image is
projected on the screen. The lower the value, the image
farther down.
P input
B R
29
The Screen Menu