Sony VPL-PHZ10 Operating Instructions Manual page 19

Slide the lens shift adjustment cover as below.
Lens shift adjustment cover
Adjusting the tilt of the projector by using lens shift
You can adjust the position of the projected image by turning the lens shift dials (H
lens shift dial, V lens shift dial).
1
Slide the lens shift adjustment cover to open.
For details, see page 19.
2
Turn the  H lens shift dial (for adjusting right and left),  V lens shift dial
(for adjusting up and down) to adjust lens shift.
 H lens shift dial
If you keep turning the lens shift dials, the lens shift positions are restored to
the original positions. Keep turning to find the best positions. For details on the
adjustment range, see the "Lens shift range" (page 83).
Notes
• While adjusting the lens shift, be careful not to look into the lens.
• When turning the H lens shift dial, the lens shift may move up or down. (When
turning the V shift dial, the lens shift may move right or left.) In that case, adjust
the lens shift with each dial again.
3
Slide the lens shift adjustment cover to close.
Adjusting the tilt of the projector with the front feet (adjustable)
By changing the slope of the projector with front feet (adjustable), you can adjust
the position of the projected image.
 V lens shift dial
Projecting an Image
19