The Installation Menu - Sony VPL-PHZ10 Operating Instructions Manual

The Installation Menu

The Installation menu is used for installing the projector.
Setting items
Screen Fitting
*1
V Keystone
*1
H Keystone
Corner Keystone
Image Flip
High Altitude
Mode
Filter Cleaning
Digital Shrink
*3*4*5
38
The Installation Menu
Item descriptions
HV Keystone/ Corner Keystone: You can choose how to correct
image twist.
This is displayed when "HV Keystone" is selected in "Screen
Fitting."
The higher the setting, the narrower the top of the projected
image. The lower the setting, the narrower the bottom of the
projected image.
This is displayed when "HV Keystone" is selected in "Screen
Fitting."
The higher the setting, the narrower the right side of the
projected image. The lower the setting, the narrower the left side
of the projected image.
*1
This is displayed when "Corner Keystone" is selected in "Screen
Fitting."
Adjust: Corrects image twist.
Reset: Resets the adjusted values to their default values.
HV/H/V/Off/Auto: Flips the projected image horizontally and/or
vertically according to the installation method.
On/Off: Set to "On" when using the projector at an altitude of
1,500 m or higher. Continuing to use the wrong setting may affect
component reliability.
Turns off the projector and cleans the air filter.
Shrinks or adjusts the size of the projected image.
Digital Shrink: Adjusts the size of the projected image. If you set
the value to "0", the image is set to the original size. The shrinking
rate is 100% to 90%.
Shift: Adjusts the position of the projected image. The adjustable
range varies from the shrinking rate.
*2