Sony VPL-PHZ10 Operating Instructions Manual page 21

2
Use the /// keys to set the value. The higher the setting, the narrower
the top of the projected image. The lower the setting, the narrower the
bottom.
Press the RESET key to restore the Projected image before adjustment.
When the projected image is a trapezoid, tapering to the right or left
1
Press the KEYSTONE key on the remote commander twice or select "H
Keystone" in the Installation menu.
2
Use the /// keys to set the value. The higher the setting, the narrower
the right part of the projected image. The lower the setting, the narrower
the left part.
Press the RESET key to restore the projected image before adjustment.
Notes
• Since the Keystone adjustment is an electronic correction, the image may be
deteriorated.
• Depending on the position adjusted with the lens shift feature, the aspect ratio
of the image may change from the original or projected image may be distorted
with Keystone adjustment.
Increase the number
towards plus
Increase the number
towards minus
Increase the number
towards minus
Increase the number
towards plus
Projecting an Image
21