Sony VPL-PHZ10 Operating Instructions Manual page 46

1
Click the [WLAN Setting] to open
the WLAN Setting page.
WLAN Setting button
2
Enable or disable the radio wave
output of USB wireless LAN
module.
Wireless ON:
Enables radio wave output of
USB wireless LAN module.
Wireless OFF:
Disables radio wave output of
USB wireless LAN module.
WLAN Network:
Set the modes for USB wireless
LAN module.
Items
Access
Point
Client
3
(a) Input the settings for Access
Point Mode.
When the USB wireless LAN
module is activated as an access
point, set the items for the access
point.
46
Using Network Features
2
3-(a)
Descriptions
Activates USB
wireless LAN module
as an access point.
Set the items for
WLAN manually.
Activates USB
wireless LAN module
as a client.
Network Name (SSID):
Input the SSID of the access point
if "WLAN Network" is set to
"Access Point" (page 46).
The factory setting is "VPL + the
MAC address of the LAN."
Channel Setting:
Select the channel of the access
point if "WLAN Network" is set to
"Access Point" (page 46).
Encryption Type:
Select the security method of the
access point from the followings
if "WLAN Network" is set to
"Access Point" (page 46).
Encyption
Descriptions
Type
Open Sets the security
method of the access
point to open system
authentication.
WEP 64bit Sets the security
method of the access
point to WEP (64bit).
WEP 128bit Sets the security
method of the access
point to WEP (128bit).
MIX (WPA- Sets the security
PSK/WPA2- method of the access
PSK (TKIP/ point to MIX.
AES)) (corresponding to
both WPA-PSK (TKIP/
AES) and WPA2-PSK
(AES) security
methods).
WPA2- Sets the security
PSK(AES) method of the access
point to WPA2-PSK
(AES).
Key:
Input the password for security
method of the access point
according to the selected
encryption type as below;