Sony VPL-PHZ10 Operating Instructions Manual page 30

Aspect
Input signal
4:3
16:9
16:10
4:3
16:9
30
The Screen Menu
Recommended
setting value and
projected image
*1 *2 *3
Full1
*1 *2 *3
Full1
*3
Full1
*4 *5
4:3
16:9
*1: If you select "Normal," the image is
projected in the same resolution as
the input signal without changing
the aspect ratio of the original
image.
*2: If you select "Full2," the image is
projected to fit the projected image
size, regardless of the aspect ratio of
the image.
*3: If you adjust the projected image
position using an image with 16:9
aspect ratio and then switch the
input source to 4:3 image, the top
and bottom edge of the image may
be hidden. In this a case, select
"Full3."
*4: Depending on the input signal, the
projected image may be projected as
illustrated below. In this a case,
select "16:9."
*5: Depending on the input signal, the
image may be projected as
illustrated below. In this a case,
select "Zoom."