Displaying The Control Window Of The Projector With A Web Browser - Sony VPL-PHZ10 Operating Instructions Manual

Displaying the Control Window of
the Projector with a Web Browser
1
Connect the LAN cable (page 11).
2
Set the network settings for the
projector using "LAN Settings" on
the Connection/Power menu
(page 34).
3
Start a web browser on the
computer, enter the following in
the address field, then press the
Enter key on your computer.
http://xxx.xxx.xxx.xxx
(xxx.xxx.xxx.xxx: IP address for the
projector)
You can confirm the IP address of
the projector in the "LAN Settings"
on the Connection/Power menu
(page 34).
The following window appears in
the Web browser:
Once you make the network
settings, you can open the Control
window only by performing step 3
of this procedure.
42
Using Network Features
How to operate the Control window
Switching the page
Click one of the Page Switching
buttons to display the desired setting
page.
Page Switching buttons
Setting the access limitation
You can limit a user for accessing any
particular page.
Administrator: Allowed access to
all pages
User: Allowed access to all pages
except the Setup page
Set the access limitation from
[Password] of the Setup page.
When you access the Setup page for
the first time, enter "root" in the Name
box and enter "Projector" in the
Password box of User.
When you log in for the first time, the
window that prompts you to change
the password is displayed. Follow the
instructions on the screen to change
the password.
The Name box of the Administrator is
preset to "root."