Table of Contents
Advertisement
The Function Menu
The Function menu is used for setting various functions of the projector.
Items
Volume
Mic Volume
Speaker
Speaker Setting
Smart APA
CC Display
Lamp Timer Reset
Start Up Image
All Reset
Notes
*1: APA functions when a computer signal is input via the RGB input terminal (INPUT A).
*2: The maximum available mic volume is set by the value of "Volume."
*3: When the speaker setting is set to "Always On" and the lamp is off, the audio of INPUT A and
the microphone are enabled.
If "Always On" is selected, "Eco Mode" will be set to "User," "Standby Mode" will be set to
"Standard" in conjunction.
Item descriptions
The higher the value, the louder an audio volume and the lower the
value, the lower the audio volume.
Adjust the volume of the microphone.
On/Off: When set to "On," speaker outputs sound. To not output
sound from the speaker, select "Off."
Sync with Power/Always On: When set to "Always On," the speaker
is available even in Lamp Cutoff.
On/Off: When set to "On," APA functions automatically when a
*1
signal is input.
CC1/CC2/CC3/CC4/Text1/Text2/Text3/Text4: Select the closed
caption service (captions or text).
Off: Closed caption does not appear.
When replacing the lamp, resets the lamp timer (page 58).
On/Off: When set to "On," the Start Up Image is displayed on the
screen when the projector is powered on.
Resets all settings to their factory defaults.
*2
*3
The Function Menu
29
Advertisement
Table of Contents
