Sony VPL-PHZ10 Operating Instructions Manual page 56

LAN Mode
Select this mode if "Display
Setting" in "Network
Presentation" is set to "LAN
Mode" on the projector's menu.
In this mode, the computer
connects to the wired LAN of the
projector or the USB wireless LAN
module of the projector that
operates as a client ("WLAN
Network" page 34).
AP Mode
Select this mode if "Display
Setting" in "Network
Presentation" is set to "AP Mode"
on the projector's menu. In this
mode, the computer connects to
the USB wireless LAN module of
the projector that operates as an
access point ("WLAN Network"
page 34).
For Windows
Connection method selection window
Note
The appearance of the application on
the screen is subject to change
without notice.
2
Set the projector an image will be
projected to.
a) For LAN Mode
Refer to the network information
on the projected screen of the
projector that you want the
computer connect to, and input
the IP address and the
Connection CODE. If "CODE" is
56
Using Presentation Function via Network
"----", "Connection CODE"
(page 34) is set to "Off." The
computer can connect without
inputting "CODE".
b) For AP Mode
Refer to the network information
on the projected screen of the
projector that you want the
computer connect to, and input
the SSID and the Connection
CODE. If "CODE" is
"----", "Connection CODE" is set
to "Off." The computer can
connect without inputting
"CODE". If the wireless password
is set for the SSID ("Setting the
WLAN Network of the projector"
on page 45), the wireless
password input window will be
displayed while the computer is
trying to connect. Input the
password to connect. To prevent
information leaks, the wireless
password is not displayed on the
projected screen.
Network Presentation LAN mode
Network Presentation AP mode