Preparation; Connecting The Projector; Connecting A Computer - Sony VPL-PHZ10 Operating Instructions Manual

 Preparation

Connecting the Projector

Notes
• Make sure all the equipment is powered off when connecting the projector.
• Use the proper cables for each connection.
• Insert the cable plugs firmly. Loose connections may reduce performance of
picture signals or cause a malfunction. When pulling out a cable, be sure to grip
it by the plug, not the cable itself.
• For more information, refer also to the instruction manuals of the equipment you
are connecting.
• Use a no-resistance audio cable.

Connecting a Computer

Connection with a computer is explained for each input signal.
INPUT A
For connecting a computer with an RGB output terminal.
Audio cable (Stereo mini plug) (not supplied)
Computer
Note
In screen setting of your computer, it is recommended that you set the resolution
of an external monitor as below;
• VPL-PHZ10: 1,920 × 1,200 pixels
• VPL-PWZ10: 1,280 × 800 pixels
• VPL-PXZ10: 1,024 × 768 pixels
Audio output
terminal
RGB output
terminal
Mini D-sub 15-pin cable (not supplied)
Connecting the Projector
9