Sony VPL-PHZ10 Operating Instructions Manual page 51

only from that input IP address.
For security reasons, it is
recommended to input an IP
address to restrict access.
(c) Set PJ Talk.
PJ Talk Service setting area
PJ Talk button
Start PJ Talk Service:
Set PJ Talk to enabled or
disabled. Items for PJ Talk are
enabled only when this function
is enabled. The function is
disabled at the factory default.
-Community:
Input the community name of
Advertisement and PJ Talk. If the
community name for PJ Talk is
changed, the one for
Advertisement will also be
changed. Only four
alphanumeric characters can be
input. The factory default setting
is "SONY." It is recommended
that the community name be
changed from the factory setting
to avoid unnecessary access to
the projector from other
computers.
-Port No.:
Input the server port of PJ Talk.
The factory default setting is
"53484."
-Timeout:
Input the time (seconds) until PJ
Talk communication is
terminated in the case that it is
disconnected. The factory
default setting is "30."
-Host Address:
Input the IP address that the PJ
Talk server is allowed to receive.
If no IP address is input, receiving
commands will be allowed from
any IP address. From the
moment the IP address is input,
access will be allowed only from
that input IP address. For security
reasons, it is recommended to
input an IP address to restrict
access.
(d) Set PJ Link.
PJ Link Service setting area
PJ Link button
Start PJ Link Service:
Set PJ Link to enabled or
disabled. Items for PJ Link are
enabled only when this function
is enabled. This function is
disabled at the factory setting.
Using Network Features
51