The Function Menu - Sony VPL-SW620 Operating Instructions Manual

The Function Menu

The Function menu is used for setting various functions of the projector.
Items
Volume
Mic Volume
Speaker
Smart APA
CC Display
Lamp Timer Reset
Start Up Image
Interactive
(VPL-SW635C only)
Calibration
PC Free Interactive
Assign Type B
*9
USB
Whiteboard Data
Notes
*1: APA functions when a computer signal is input via the RGB input terminal (INPUT A/INPUT
B).
*2: The maximum available mic volume is set by the value of "Volume."
26
The Function Menu
Item descriptions
The higher the value, the louder an audio volume and the lower the
value, the lower the audio volume.
Adjust the volume of the microphone.
On/Off: When set to "On," speaker outputs sound. To not output
sound from the speaker, select "Off."
On/Off: When set to "On," APA functions automatically when a
*1
signal is input.
CC1/CC2/CC3/CC4/Text1/Text2/Text3/Text4: Select the closed
caption service (captions or text).
Off: Closed caption does not appear.
When replacing the lamp, resets the lamp timer (page 74).
On/Off: When set to "On," the Start Up Image is displayed on the
screen when the projector is powered on.
Auto/Manual (Main)/Manual (Sub): Performs calibration for the PC
Free Interactive function (page 50) and the mouse mode function
(page 56). If you select "Auto", the projector performs the calibration
automatically. If you select "Manual (Main)," the calibration for the
main pen will be performed manually. If you select "Manual (Sub),"
the calibration for the sub pen will be performed manually.
On/Off: If the computer and projector are not connected with the USB
cable and you select "On," the toolbar will be displayed. If you select
"Off," the toolbar will not be displayed, and the PC Free Interactive
function cannot be used.
Off/Input-A/Input-B/Input-C/Network/Type B USB: Select the
image for when you use the Interactive Presentation Utility 2 or mouse
mode. If you select the same input terminal as the one selected for
"Input" (menu for switching the input signal) of the projected image
(page 14), you can use Interactive Presentation Utility 2 or mouse
mode on it. If you select "Off," you cannot use Interactive Presentation
Utility 2 and mouse mode.
Retrieve to computer/Save to projector: If you select "Retrieve to
computer," you can move the data, saved in whiteboard mode, via
USB cable to your computer. If you select "Save to projector," you can
save the whiteboard data the projector is projecting by clicking the
save button on the main pen toolbar of the PC Free Interactive
*7 *8
function.
*2
*6
*3 *4 *5