How to alter the angle
When the projector is installed on an uneven surface, you can adjust using the
front feet (adjustable).
Notes
• Be careful not to let the projector down on your fingers.
• Do not push hard on the top of the projector with the front feet (adjustable)
extended. It may cause malfunction.
Changing the aspect ratio of the projected image
Press the ASPECT key on the remote commander to change the aspect ratio of the
projected image. You can also change the setting in Aspect of the Screen menu
(page 28, 30).
Correcting trapezoidal distortion of the projected image (Keystone feature)
If the image becomes trapezoidal, set the keystone manually.
When the projected image is a trapezoid, tapering to the top or bottom
1
Press the KEYSTONE key on the remote commander once or select "V
Keystone" in the Installation menu.
20
Projecting an Image