Turning Off The Power - Sony VPL-PHZ10 Operating Instructions Manual

2
Adjust the position of the corner you want to correct by using the ///
 keys. The cursor will disappear if the adjustment range limit is reached.
Press the RESET key to restore the projected image before adjustment.
Displaying a pattern
You can display a pattern for adjusting the projected image or a grid pattern with
the PATTERN key on the remote commander. Press the PATTERN key again to
restore the previous image. You can use a grid pattern as a guide to write text or to
draw lines and shapes on the whiteboard or blackboard without using a computer.
Note
You cannot use this key when "Type B USB" or "Network" is selected as the input.
Automatically adjusts Phase, Pitch and Shift of projected image while a signal is input
from a computer (APA (Auto Pixel Alignment))
Press the APA key on the remote commander. Press again to cancel adjusting
during the setting.
You can also set APA in the Screen Menu (page 29). If Smart APA in the Function
menu is set to "On", executes APA automatically when a signal is input (page 31).

Turning Off the Power

1
Press the / key on the unit or the remote commander.
The projector starts shutdown and turns off.
2
Unplug the AC power cord from the wall outlet.
Example of cursor display:
You can adjust in all directions.
You can adjust only to the left/
right or downwards.
Projecting an Image
23