Group Call Pickup Configuration; Dialog Info Call Pickup - Yealink VP59 Administrator's Manual

You can pick up the group incoming call using the GPickup soft key.
Tip : You can set a DSS key as a Group Pickup key to pick up a group call. For more information, refer to
Topic

Group Call Pickup Configuration

Group Call Pickup Configuration
The following table lists the parameters you can use to configure the group call pickup.
Parameter features.pickup.group_pickup_enable
Description It enables or disables the user to use GPickup soft key when performing group call pickup feature.
0-Disabled
Permitted
Values
1-Enabled, the phone will display the GPickup soft key on the Dialing screen.
Default 0
Web UI Features > Pick up & Park > Group Call Pickup
Parameter features.pickup.group_pickup_code
It configures the group call pickup code on a phone basis.
Description
Note: The code configured by "account.X.group_pickup_code" takes precedence over that configured
by this parameter.
Permitted
String within 32 characters
Values
Default
Blank
Web UI
Features > Pick up & Park > Group Call Pickup Code
Parameter account.X.group_pickup_code
It configures the group pickup code.
Description
Note: The code configured by this parameter takes precedence over that configured by "fea-
tures.pickup.group_pickup_code".
Permitted
String within 32 characters
Values
Default Blank
Web UI Account > Advanced > Group Call Pickup Code
[1]
X is the account ID. For VP59/T58A, X=1-16; for CP960, X=1.

Dialog Info Call Pickup

While some SIP servers implement directed call pickup using a directed call pickup code, others also support imple-
ment this feature through SIP signals.
Note : In this way, you do not need to configure the directed call pickup code.
If you enable the phone to implement directed call pickup through SIP signals, the phone picks up an incoming call
via a SIP INVITE message with a Replaces header. The value of Replaces is derived from a NOTIFY message with
the dialog-info event. This feature applies only to directed call pick-up attempts initiated against monitored BLF
resources. It means you can pick up an incoming call by tapping a BLF/BLF List key.
<y0000000000xx>.cfg
<y0000000000xx>.cfg
[1]
<MAC>.cfg
Advanced Features
DSS Keys .
395