Handset Wallpaper; Handset Wallpaper Configuration; Handset Screen Saver; Handset Screen Saver Configuration - Yealink VP59 Administrator's Manual

Handset Wallpaper

Wallpaper is an image used as the background for the handset idle screen. Users can select an image from hand-
set's built-in background.
Topic

Handset Wallpaper Configuration

Handset Wallpaper Configuration
The following table lists the parameter you can use to configure the handset wallpaper.
Parameter custom.handset.wallpaper
It configures the wallpaper displayed on the handset LCD screen.
Description
Note: It will take effect on all handsets that are registered on the same phone. It works only if "stat-
ic.auto_provision.handset_configured.enable" is set to 1 (Enabled).
1-Wallpaper1
2-Wallpaper2
Permitted
3-Wallpaper3
Values
4-Wallpaper4
5-Wallpaper5
Default -1, do not change the wallpaper set on each handset.
Supported
W53H, W56H
Devices
Handset UI OK > Settings > Display > Wallpaper

Handset Screen Saver

The screen saver of the handset is designed to protect your LCD screen. You can enable the screen saver to pro-
tect the LCD screen, an analog clock will be activated and appear on the LCD screen after the handset is idle for
approximately 10 seconds.
It is only applicable to W56H/W53H handsets.
Topic

Handset Screen Saver Configuration

Handset Screen Saver Configuration
The following table lists the parameter you can use to configure the handset screen saver.
Parameter custom.handset.screen_saver.enable
It enables or disables screen saver feature.
Description
Note: It will take effect on all handsets that are registered on the same phone. It works only if "stat-
ic.auto_provision.handset_configured.enable" is set to 1 (Enabled).
-1-Do not modify the configuration.
Permitted
0-Disabled
Values
1-Enabled, an analog clock will be activated and appear on the LCD screen if no user activity is
sensed for approximately 10 seconds.
Using Handsets with VP59/T58A Phones
<y0000000000xx>.cfg
[1]
<y0000000000xx>.cfg
114