Call Recording; Call Recording Configuration - Yealink VP59 Administrator's Manual

Parameter account.X.conf_uri
It configures the network conference URI for a specific account.
Description
Note: It works only if "account.X.conf_type" is set to 2 (Network Conference).
Permitted
SIP URI within 511 characters
Values
Default Blank
Web UI Account > Advanced > Conference URI
Parameter account.X.networkconf_type
It configures how a network conference is set up.
Description
Note: It works only if "account.X.conf_type" is set to 2 (Network Conference).
0-The phone transfers the participant to the server by a REFER method with conference URI in the
Refer-To header.
Permitted
Values
1-The phone transfers the server to the participant by a REFER method with SIP URI in the Refer-To
header.
Default 0
[1]
X is the account ID. For VP59/T58A, X=1-16; for CP960, X=1.

Call Recording

Yealink phones support recording calls (audio-only calls or video calls) or conferences during a call. By default, the
recorded files are saved in the internal SD card. You can also save the recorded files in the connected USB flash
drive.
For VP59/T58A phones, if you connect the USB flash drive to the IP phone, the recorded files will be saved accord-
ing to the priority: USB flash drive > Internal SD card. For CP960 phones, if you connect the USB flash drive to the
IP phone, you can choose to save the recorded files to the Internal SD card or USB flash drive.
Note
: Yealink phones support USB flash drive in FAT32 or NTFS format.
Important : Before recording any call, especially those involving PSTN, it is necessary to know about the rules and restric-
tions of any governing call-recording in the place where you are. It is also very important to have the consent of the person
you are calling before recording the conversation.
Topic

Call Recording Configuration

Call Recording Configuration
The following table lists the parameter you can use to configure call recording.
Parameter features.usb_call_recording.enable
It enables or disables the USB call recording feature.
Description
Note: It works only if "static.usbdisk.function.enable" is set to 1 (Enabled).
0-Disabled
Permitted
Values
1-Enabled, the recorded calls will be saved to the USB flash drive.
Default 1
Parameter features.auto_recording.enable
[1]
[1]
<MAC>.cfg
<MAC>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Call Features
381