Ringer Volume Configuration; Sending Volume Configuration - Yealink VP59 Administrator's Manual

Administrator's Guide for VP59/SIP-T58A/CP960 IP Phones

Ringer Volume Configuration

You can configure the ringer volume as a fixed level, so the user cannot adjust the ringer volume on the phone.
This feature is used to avoid missing calls when the user turns down the ringer volume.
The following table lists the parameters you can use to configure the ringer volume.
Parameter force.voice.ring_vol
Description It configures the ring tone as a fixed volume.
Blank-the user can adjust the ringer volume on the phone.
Permitted
Values
0 to 15-the user cannot adjust the ringer volume on the phone, the ring tone is the configured volume.
Default Blank
Parameter phone_setting.voice.ring_vol_min
It configures the adjustable minimum ringer volume on the phone.
Description
Note: It only takes effect on the ringer volume of the speaker on the phone. After the headset is con-
nected, the ringer volume can only be controlled by the headset itself.
Permitted
Integer from 0 to 15
Values
Default 0

Sending Volume Configuration

You can configure the sending volume of currently engaged audio devices (handset, speakerphone or headset)
when the phone is in use.
The following table lists the parameters you can use to configure the sending volume.
Parameter voice.handfree_send
It configures the sending volume of the speaker.
Description
Note: We recommend that you modify this parameter cautiously. An unsuitable value may render the
voice quality bad.
Permitted
Integer from -50 to 50
Values
Default
0
Web UI Features > Audio > Handfree Send Volume (-50~50)
Parameter voice.handfree.autoreset_spk_vol
Description It configures the speaker's volume level during a call.
0-The speakerphone volume at the end of a call persists between calls.
Permitted
1 to 15-The speakerphone volume does not persist between calls, and resets to this specified level
Values
each new call.
Default
0
Parameter voice.handset_send
It configures the sending volume of the handset.
Description
Note: We recommend that you modify this parameter cautiously. An unsuitable value may render the
voice quality bad.
Permitted Integer from -50 to 50
144
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg