Yealink VP59 Administrator's Manual page 46

Administrator's Guide for VP59/SIP-T58A/CP960 IP Phones
Description It enables or disables the wireless access point.
0-Disabled
Permitted
Values
1-Enabled
Default 0
Supported
All phones except CP960
Devices
Web UI Network > Wireless AP > AP
Phone UI Settings > Basic Settings > Wi-Fi AP
Parameter static.wifiap.ssid
Description It configures the name of wireless AP.
Permitted
String within 512 characters
Values
Default Yealink-XXXXXX (XXXXXX refers to the last six digits of the MAC address, uppercase)
Supported
All phones except CP960
Devices
Web UI Network > Wireless AP > AP Name
Phone UI Settings > Basic Settings > AP Configure > AP Name
Parameter static.wifiap.security_mode
Description It configures the security mode of the wireless AP.
Permitted
None, WPA2-PSK
Values
Default
WPA2-PSK
Supported
All phones except CP960
Devices
Web UI Network > Wireless AP > Security Mode
Phone UI Settings > Basic Settings > AP Configure > AP Security Mode
Parameter static.wifiap.password
It configures the password of the wireless AP.
Description
Note: Only when "static.wifiap.security_mode" is set to WPA2-PSK, do you need to configure this para-
meter.
Permitted
String with 8 to 64 characters
Values
Default
A random string with 8 characters
Supported
All phones except CP960
Devices
Web UI Network > Wireless AP > Password
Phone UI Settings > Basic Settings > AP Configure > AP Password
43
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg