Number Assignment Configuration - Yealink VP59 Administrator's Manual

Note
: You can only assign one outgoing line and one incoming line for the CP930W. And make sure that the outgoing line and
the incoming line are the same line.
Topic

Number Assignment Configuration

Number Assignment Configuration
The following table lists the parameters you can use to assign lines.
Parameter handset.X.incoming_lines
Description It configures the lines to receive incoming calls for a specific handset.
1-Line 1
2-Line 2
3-Line 3
Permitted
Values
4-Line 4
5-Line 5
Multiple line IDs are separated by commas.
The incoming line for VP59 Phone/T58 Phone is line 1-line5;
The incoming line for handset 2 is line 2.
Default The incoming line for handset 3 is line 3.
The incoming line for handset 4 is line 4.
The incoming line for handset 5 is line 5.
Web UI Account > Number Assignment > Incoming lines
W53H/W56H:
OK > Settings > Telephony > Incoming Lines (Default PIN:0000) > HandsetX
Handset UI
DD Phone:
Menu > Settings > Advanced Settings (default password: 0000) > Incoming Lines
Parameter handset.X.dial_out_lines
It configures the lines to place outgoing calls for a specific handset.
Description
Multiple line IDs are separated by commas.
1-Line 1
2-Line 2
Permitted
3-Line 3
Values
4-Line 4
5-Line 5
The outgoing line for VP59 Phone/T58 Phone is line 1-line5;
The outgoing line for handset 2 is line 2.
Default The outgoing line for handset 3 is line 3.
The outgoing line for handset 4 is line 4.
The outgoing line for handset 5 is line 5.
[1]
[1]
Using Handsets with VP59/T58A Phones
<y0000000000xx>.cfg
[1]
<y0000000000xx>.cfg
116