Technical Data; General Information - Siemens SIMATIC ET 200SP Operating Instructions Manual

Technical data

10.1

General information

Article number
General information
Product type designation
Firmware version
● FW update possible
usable BaseUnits
Reliability
Mean Time Between Failure MTBF
Product function
I&M data
Engineering with
● STEP 7 TIA Portal can be configured/integrated as of ver‐
sion
● PROFIBUS as of GSD version/GSD revision
● PROFINET as of GSD version/GSD revision
Supply voltage
Load voltage L+
● Rated value (DC)
● Permissible range, low limit, static (DC)
● Permissible range, high limit, static (DC)
● Permissible range, low limit, dynamic (DC)
● Permissible range, high limit, dynamic (DC)
● Polarity reversal protection
● Non-periodic overvoltages
Input current
Current consumption, max.
Power loss
Typical power loss
Address area
Assigned address area
● Inputs
● Outputs
Power supply from SIMATIC S7 backplane bus
Current consumption ET 200SP backplane bus
Technology module TM SIWAREX WP351 HF
Operating Instructions, 01/2020, A5E47521010-AA
7MH4138-6BA00-0CU0
Technology module TM SIWAREX WP351 HF
V1.0
Yes
BU type U0
60 years @T = 40 °C (continuous operation)
A
Yes; I&M0 to I&M3
Configurable as of V15 using HSP0281
GSD revision 5
GSDML V2.3
24 V
19.2 V
28.8 V
18.5 V
30.2 V
Yes
35 V DC for 500 ms with a recovery time of 50 s
max. 140 mA @ 24 V DC + [DQ 3 x 0.5 A]
1.7 W
32 bytes
32 bytes
max. 27 mA @ 3.5 V (SBK4)
10
149