Loading Print Image With Idesign - Weber Markoprint integra PP108 Operating Manual

Operation

Loading Print Image with iDesign

Requirements

The Markoprint integra PP108 print system is connected with the iDesign
Software by a network or serial interface.

It's also possible to transfer the print image to a USB-stick and connect the USB-
stick with the system to load the print image.
Instruction
Please load a print image from iDesign to the memory of the Markoprint integra PP108
print system as follows:
Step
1
2
3
4
5
6
1
3
2
Procedure
Select the menu Functions on the left side of iDesign
If several print systems are connected with the iDesign software, click on the
illustration of the corresponding print system which shall be selected.
Click on the button [Printing].
Select the desired directory by pressing the directory button. The print
images, saved in
C:\user\public\iDesign\label standard.
Click to select the desired print image. The selected print image is shown in
the preview.
Click on the button [Print Start] to print the selected print image. A window
with "Print start ok" is shortly shown for the confirmation.
Page 66 of 104
40075165 Markoprint integra PP108
iDesign can be
Fig. 32: Print image selection in iDesign
found in the directory
4
5
6
GB