Table of Contents
Advertisement
Installation and Initial Operation
Connection of the grounding cable
To prevent faults due to potential differences, an electro-conductive connection between
control unit and conveyor belt must be established.
Requirements
The system is switched off.
The grounding cable is pre-assembled at the ground bolt of the system.
Instruction
Please connect the system with the conveyor as follows:
Step
1
Procedure
Connect the free end of the grounding cable electro conductive with the
conveyor.
Page 45 of 104
40075165 Markoprint integra PP108
Fig. 8: Grounding cable at the system
GB
Advertisement
Table of Contents
