Table of Contents
Advertisement
Operation
Switch off
Requirements
The print system is connected with power and switched on
Instruction
Please switch the print system off as follows:
Step
1
2
3
4
5
Procedure
Press the Power button for approx. 10 seconds. The Status, 123 and Ink
LEDs will flash yellow.
After approx. one minute the LEDs flash green and the pumps stop running.
Set the switch from I to 0 on the back of the device.
The system is switched off completely and starts into the last operating
status the next time it is switched on.
The locking clamp is not mounted.
Page 58 of 104
40075165 Markoprint integra PP108
Fig. 20: ON-/OFF-BUTTON on the back side of the system
GB
Advertisement
Table of Contents
