Operation
To set the print start delay
It's possible to change the print start delay at the system with a key combination.
Instruction
Please set the print start delay at the system as follows:
Step
1
2
3
4
Procedure
Press the [SELECT]-Button and the [ON-/OFF]-Button to increase the print
start delay.
The delay increase by 1 mm each time the button is pressed.
Press the [SELECT]-Button and [INK]-Button to decrease the print start
delay.
The delay decrease by 1 mm each time the button is pressed.
Page 65 of 104
40075165 Markoprint integra PP108
Fig. 30: SELECT-BUTTON and ON-/OFF BUTTON
Fig. 31: SELECT-BUTTON and INK-BUTTON
GB