Table of Contents
Advertisement
Installation and Initial Operation
Step
6
7
8
9
Procedure
The ink should run in the ink tank. If the tank is full, the ink LED lights green.
(This takes up to 30 sec.)
Wait 1 -2 minutes until the ink circuit is completely filled and the pumps work
regularly.
Remove the locking clamp of the nozzle plate and keep it in a convenient
place.
Assign a print image: Press the [123]-button and the[ON-/OFF]-button. Now
the status LED should light green.
Page 54 of 104
40075165 Markoprint integra PP108
Fig. 16: Insert ink bottle
Fig. 17: Remove locking clamp
GB
Advertisement
Table of Contents
