Boot-Led Messages - Weber Markoprint integra PP108 Operating Manual

Appendix

Boot-LED messages

During booting of the system progress can be determined by means of the LED.
If the system stops during booting the cause can be determined by means of the LED.
FC means flashing. An error can be determined on the basis of the number of flashes.
Status-LED Sensor-LED
ye ye
—
rd
—
rd
—
ye
—
ye
ye rd
— —
rd rd
rd FC:
rd FC:
ge gn
ye rd /
rd / —
ye
ye ye /
ye ye /
gn / —
ye
—
gn
Description
Boot BF-Intern
Write 64MB memory
Read/invert 64MB memory
Read/test 64MB memory
Test ok / Load BootMain from SPI
Programming and start of BootMain
BootMain initialization
Fatal error
Boot-error 4x = SPI; 5x = GA; 6x = Displ; 7x = SD-Card; 8x = USB;
rd
9x = RTC; 10x = Task
gn Init-error 1x = Dev; 2x = FS; 3x= UsrCl
Read SD-Card
gn Wait for Stick
No boot data
gn Booting of stick?
rd Copying of stick?
Copy Ok
Main program loaded and started
Page 92 of 104
40075165 Markoprint integra PP108
GB