Table of Contents
Advertisement
Faults
Faults
The following chapter describes possible causes of malfunctions and how to remedy
these.
In case of frequent faults, reduce the service intervals depending on the actual work
load.
Please contact your local distributor with regard to faults that cannot be remedied
with the information provided below.
Safety
Staff
The fault remediation work described here, unless specified otherwise, can be
performed by the operator.
Some tasks may only be performed by specially trained specialized staff or
exclusively by the manufacturer; this is specifically pointed out in the description
of the individual faults.
Work on the electrical system may only be performed by electricians.
Danger to life through electric shock!
DANGER TO LIFE!
Contact with live parts poses imminent danger to life.
Damaged insulation or individual components can be
lethal.
Therefore:
–
Immediately switch off the power supply and initiate
repairs if the insulation is damaged.
–
Work on the electrical system may only be performed
by electricians.
–
Before working on the electrical system, disconnect
from the mains (remove mains plug) and check that
power is off.
–
Always disconnect mains before performing cleaning
and repair tasks.
–
Keep moisture from live parts. Moisture may cause a
short-circuit.
Page 78 of 104
40075165 Markoprint integra PP108
GB
Advertisement
Table of Contents
