Appendix
Appendix
Software-Update
Software-update with USB-Stick
Requirements
The program directories „HMI", „Html" and „SYSTEM" are copied in the main
directory of an empty USB-stick.
The Markoprint integra PP108 is not connected to the power supply.
Instruction
Please proceed the software-update as follows:
Step
1
2
3
4
5
Software-Upgrade
A software upgrade with costs is comfortably possible via the Weber Marking Partner
Portal
Please contact you distributor for a software upgrade.
You can find a detailed instruction of the software upgrade below the search key
„Configuration upgrade" in the Wiki of Weber Marking Partner Portal.
Current software version
Status
Date
3.023
01.02.2019
Procedure
Connect the Markoprint integra PP108 with the power supply and press the
[Ink]-button simultaneously and press it as long as the Sensor LED flashes
green/red.
Connect the USB-stick in the USB socket on the top side of the system.
The Sensor LED flashes yellow/red if the program is load.
Confirm by pressing the start-button and wait until the system is restart.
Remove now the USB-stick.
Reason for change
Page 90 of 104
40075165 Markoprint integra PP108
GB